垂准仪校准的一个新方法

介绍了一种溯源于重力线的垂准仪校准方法;分析了＂顶杆式铅垂准线＂与＂平行光管式水平准线＂之间的联系与区别;基于顶杆式铅垂准线校准的几何模型,给出了天顶/底角的计算方法。     

大展弦比运输机标模高升力构型设计与评估

介绍了中国航空工业空气动力研究院基于分层策略遗传算法的多段翼型优化设计工具和高升力构型计算评估方法,参照国内外大展弦比运输机指标为FL-9增压风洞设计了高升力构型标模,为检验标模气动性能,在法国ONERA F1风洞进行了一系列风洞试验和采用UNSMB平台进行了数值模拟。结果显示计算结果与试验结果有着较好的一致性,设计方案具有较好的增升效果。     

Measurements of heat transfer and pressure in a trailing edge cavity of a turbine blade

 An experimental investigation is conducted to obtain the heat transfer and pressure drop data for an integral trailing edge cavity test section that simulates a novel turbine blade's internal cooling passage with bleed holes. Local heat transfer is measured on both the suction and pressure sides by a transient liquid crystal technique, while pressures at six positions are recorded by pressure calibrators. Moreover, flow characteristic and its effect on heat transfer are analyzed for conditions with or without bleed flow. The experimental results show that, in the cases with bleed flow, local heat transfer on the pressure side exceeds that on the suction side in the first and second channels. In the cases without bleed flow, in the first and third channels, local heat transfer on the suction side weakens whilst it increases significantly on the pressure side. For the second channel, non-bleed condition leads to a more balanced heat transfer distribution between the upstream and downstream channel. Besides, after the bleed holes are blocked, heat transfer in the first bend region on the suction side declines sharply, while the opposite phenomenon occurs for the second bend region on the pressure side. In both bleed and non-bleed cases, the total pressure of six measurement positions decreases continuously along the channel at the same Reynolds number and it promotes for higher Reynolds number. Among all the measurement points, under the same flow rate condition, the highest speed occurs at Position 5, which also shows the maximum difference between the total and static pressures. When the bleed holes are blocked, the total pressure at each measurement position appears to increase.     

时延平滑系统对实时数据传输影响分析

在实时数据传输过程中,科考船海事卫通链路会出现数据丢包和乱序数据处理不当的问题。通过分析科考船海事卫通链路系统组成,数据传输协议和类型,数据传输时延及抖动,时延平滑系统工作机制和处理流程等,发现时延平滑系统设计上存在缺陷。针对这一缺陷,提出在时延平滑系统中增加数据包分点实时监测、序号判定、序号重排等改进方法,对时延平滑系统的处理流程进行了完善。通过搭建仿真环境并进行模拟演练,验证了改进设计方法的可行性;在某工程应用中,科考船海事卫通链路采用改进后的时延平滑系统,未出现丢包和乱序问题,达到了预期效果。     

地基深空网发射机现状及未来发展

我国未来深空探测工程的发展对地基深空站发射机提出了更高的要求,不仅仅需要具有更高的输出功率,同时需要解决发射机高频谱纯度、高效率以及上行功率合成等。针对这些要求,对国内外地基深空网的组成和深空站高功率发射机现状以及未来发展趋势进行了研究,分析了速调管发射机与固态发射机在高功率输出条件下的优势,在此基础上,提出了我国深空站速调管发射机需要开展高功率连续波速调管、高功率低损耗滤波器、低纹波高功率开关电源、上行功率合成等关键技术,并为相应关键技术提供了理论建议及相应的解决方法,这可以为我国未来深空探测工程高功率发射机研制提供技术支撑,为后续地基深空网建设和发展提供参考。     

Multi-objective Optimization Method for Automatic Drilling and Riveting Sequence Planning

 There are numerous riveting points on the large-sized aircraft panel, irregular row of riveting points on delta wing. It is es-sential to plan the riveting sequence reasonably to improve the efficiency and accuracy of automatic drilling and riveting. Therefore, this article presents a new multi-objective optimization method based on ant colony optimization (ACO). Multi-objective optimization model of automatic drilling and riveting sequence planning is built by expressing the efficiency and accuracy of riveting as functions of the points’ coordinates. In order to search the sequences efficiently and improve the quality of the sequences, a new local pheromone updating rule is applied when the ants search sequences. Pareto dominance is incorporated into the proposed ACO to find out the non-dominated sequences. This method is tested on a hyperbolicity panel model of ARJ21 and the result shows its feasibility and superiority compared with particle swarm optimization (PSO) and ge-netic algorithm (GA).     

风力机组叶片的先进翼型族设计

大型风力机组叶片设计需要专用的翼型族,以满足风力机组运行的环境要求。高升阻比、低粗糙度影响是该翼型族的气动性能特点。为了发展我国具有自主知识产权的风力机专用翼型族,在科技部863项目的支持下,北京航空航天大学联合国内气动研究单位,通过理论分析、数值模拟和风洞试验等技术途径,开发了两个适用于大型风力机组叶片的先进翼型族。理论分析和风洞试验表明,设计结果基本达到了预先设定的气动性能指标。     

注射成型和注射压缩成型角窗的残余应力比较

基于粘性流体力学基本方程和粘度模型,建立了注射成型和注射压缩成型的残余应力计算模型,然后对角窗的注射成型和注射压缩成型进行了计算模拟,结果表明,注射成型角窗的残余应力大,且分布范围宽;注射压缩成型角窗的残余应力相对较小,且分布范围较窄,这种特征与注射压缩成型时熔体流动阻力小、型腔压力和体积温度分布均匀有关。最后采用偏振光法对实际注射成型和注射压缩成型角窗的应力分布进行了测试,进一步验证了注射压缩成型制品的低残余应力特点。     

大跨斜拉桥主梁断面气动导纳的实测研究

以苏通大桥为研究背景,通过专门研制的一套测压装置,利用测压法对苏通大桥主梁断面气动导纳进行了现场实测研究,并将现场实测结果与风洞实验结果及Sears函数进行了对比研究。结果表明:现场实测结果与风洞实验结果接近,与Sears函数有交叉,在低频范围内远小于Sears函数,在高频范围内逐渐与Sears函数靠拢,表明对于气动导纳来说,风洞实验结果是可靠的,且传统上利用Sears函数代替气动导纳函数进行桥梁结构抖振响应分析时得出的结果将过于保守,因此,对大跨桥梁进行抖振响应分析时,应针对气动导纳函数进行专门的实验研究。     

气动计算软件集成系统中的远程控制

随着我国航空航天技术的飞速发展，气动计算软件集成技术日趋成熟，但用户在并行计算中需要手动输入的操作较多。鉴于此，通过编程开发了基于TCP／IP协议的FTP客户端应用程序，实现了对网格文件的信息采集、过滤并将其和参数、脚本文件等批量自动上传的功能。根据批处理文件中的命令，调用Windows平台自带的客户端Telnet，向远程集群管理节点发出命令，远程启动服务器集群的并行计算任务。最后，在客户端实现了远程控制服务器集群上的计算流体力学软件Fluent进行并行计算。结果表明：使用该远程控制系统能够减少用户输入操作，提高计算效率，保证数据的实时更新。